Skip to content

Symbionts

A symbiont is any organism living on or in a host specimen, whether parasitic, parasitoid, mutualistic, commensal, phoretic, or unknown.

Each symbiont has its own UUID and is linked to its host. The link records how they interact, where on the host the symbiont was found, and whether the association is confirmed. Symbionts are available in the Mammalogy, Ornithology, Herpetology, and Ichthyology catalog formats (in Invertebrate zoology, host relationships are recorded in the measurement form's Ecological interactions section).

Symbionts use two places on a specimen record:

  • Examination fields, at the end of the measurement form, record whether the host was checked for symbionts and whether any were found. See Record an examination.
  • The symbiont tab, the bug icon in the Specimen Parts card, holds one record per symbiont lot or individual. See Add a symbiont record.

Keep both up to date. A host with no symbiont records is ambiguous: it may not have been examined, or it may have been examined and found clean. The examination fields remove that ambiguity.

Open Settings > Specimens and scroll to Symbionts. These controlled vocabularies start with editable defaults and are shared by every project on this device:

SettingDefaults
IdentificationSymbiont ID prefix and Symbiont ID number, used by New number.
Interaction typesParasitic, Parasitoid, Mutualistic, Commensal, Phoretic, Unknown
CategoriesEctosymbiont, Endosymbiont, Mesosymbiont
Detection MethodsVisual inspection, Combing, Brushing, Ethanol wash, Dissection, Blood smear, Fecal flotation, Molecular screening
Preparation MethodsWhole specimen, Fluid preserved, Slide mounted, Pinned, Dried, Frozen
Anatomical Locations24 sites from Head to Body cavity; see Anatomical locations.
StorageVial, Cryovial, Slide, Envelope, Jar
TreatmentsThe specimen Treatments defaults, plus RNAlater and Glycerol

Agree on these controlled vocabularies before fieldwork, then share them via user config transfer so every device uses the same values. Setup NAHPU also includes a Symbionts step for supported catalog formats.

Register the symbiont taxa you expect in the taxon registry too. A symbiont's taxon is chosen from the same registry as host taxa, and it can be a higher rank—such as an order or family—when the symbiont is not yet identified to species.

At the end of the measurement form, the Symbionts section has three fields:

FieldNotes
Symbionts examinedYes when the host was checked. Leave it empty when nobody looked.
Symbionts detectedYes when anything was found, No when the host was examined and found clean.
Detection remarksHow and how thoroughly the host was examined, or why it was not.

Record Symbionts examined: Yes and Symbionts detected: No for a clean host. Do not create an empty symbiont record to say nothing was found.

  1. Open the host specimen and select the bug icon in the Specimen Parts card.
  2. Select Add symbiont.
  3. Choose the Symbiont taxon, or leave it as Not identified. Use the add button beside the field to register a taxon that is not in the list yet.
  4. Choose the Interaction type. A one-line definition appears below it.
  5. Fill in what you know of the rest of the form, then save.

A new record starts with the host's preparator as Collector, or its cataloger when no preparator is set, and with the host's collection date as Date collected, or its preparation date when no collection date is set. Change them when someone else swept, combed, or necropsied the host, or when the symbiont was taken on another day.

The form is grouped into sections. Show more reveals Preparation & preservation, Curation, and any custom fields hidden by default.

FieldNotes
UUIDAssigned by NAHPU and never changes. It becomes the symbiont's occurrenceID.
Symbiont IDOptional ID for the vial, slide, or envelope. The options menu offers Scan QR/Barcode on devices with a camera, New number, and Settings.
IndividualsOnly for a fish lot with recorded individuals. Links the symbiont to the fish it came from. See Fishes.

New number joins the symbiont ID prefix and the next number, such as P and 101 for P101, then increases the number. It is available only while the field is empty. Settings in the same menu edits the prefix and the next number without leaving the form.

FieldNotes
Symbiont taxonA registered taxon at any rank, or Not identified.
Interaction typeHow the symbiont relates to its host. See Interaction types and categories.
CategoryWhere a parasite or parasitoid lives on its host. Shown only for those interaction types.
Anatomical locationWhere on or in the host the symbiont was found. Narrowed by the category.
CountNumber of symbiont individuals in this record.
Life stageEgg, Larva, Nymph, Pupa, Juvenile, Adult, Cyst, Oocyst, Trophozoite, Sporozoite, Merozoite, or Gametocyte. This list is fixed.
Association statusConfirmed when the symbiont is known to belong to this host, Suspected when it may be a contaminant, such as a mite from a shared bag or trap.
FieldNotes
CollectorWho recovered the symbiont from the host.
Detection methodHow it was found, such as Combing or Blood smear.
Date collected, Time collectedWhen it was recovered from the host.
DeterminerWho identified the symbiont, often a specialist working later.
Date determinedWhen it was identified.
Determination methodHow it was identified. Uses the specimen Identification Methods controlled vocabulary.

Collector and determiner are chosen from the project personnel, as on specimens. Keeping them separate lets a field team record what they collected while a specialist adds the identification afterward.

FieldNotes
Preparation methodHow the symbiont was prepared, such as Slide mounted.
TreatmentPreservative or fixative, such as RNAlater.
Date preserved, Time preservedWhen it was preserved.
FieldNotes
StorageContainer type, such as Cryovial.
Storage locationFreezer, cabinet, shelf, or box position.
Museum permanent, Museum loanThe museum holding the symbiont, and one receiving it on loan.
RemarksAnything else about this symbiont.

Custom fields placed in the symbiont section of custom fields appear at the end of the form.

Interaction type describes the ecological relationship. The defaults are:

Interaction typeMeaning
ParasiticLives on or in the host and harms it.
ParasitoidDevelops in the host and eventually kills it.
MutualisticBoth symbiont and host benefit.
CommensalSymbiont benefits; host is unaffected.
PhoreticUses the host only for transport.
UnknownRelationship to the host is not known.

Noun forms such as Parasitism, Mutualism, Commensalism, and Phoresy are recognized as the same types. Values imported in these forms from other sources get the matching icon and behavior. You can add your own interaction types in Settings; they are saved and exported as entered.

Category describes where the symbiont lives relative to the host:

  • Ectosymbiont: on the outside, such as fleas, lice, and ticks.
  • Endosymbiont: inside, such as helminths in the gut or blood parasites.
  • Mesosymbiont: in openings and cavities connected to the outside, such as the ear, nasal cavity, or gills.

The category is shown only when the interaction type is Parasitic or Parasitoid. Changing the interaction type to anything else clears the category. A record with no interaction type keeps its category, since records imported or created before interaction types existed may carry only a category.

When you leave Interaction type empty, choose Unknown instead if the relationship is genuinely unknown. An empty value means it was not recorded.

Choosing a category narrows Anatomical location to sites that fit it:

CategoryLocations offered
EctosymbiontHead, Ear, Body, Dorsum, Venter, Limb, Tail, Skin, Fur, Feathers, Gill
EndosymbiontNasal cavity, Oral cavity, Blood, Stomach, Small intestine, Large intestine, Cecum, Liver, Lung, Heart, Kidney, Muscle, Body cavity
MesosymbiontEar, Nasal cavity, Oral cavity, Gill, Skin

Without a category, or with a category you added yourself, every location is offered. Locations you add in Settings are never filtered out. Older category values, such as Ectoparasite, Endoparasite, and Mesoparasite, filter the options the same way as their symbiont names.

The symbiont tab lists one row per record. The icon shows the interaction type, with a mite icon for records without one or with a custom type. The title shows the symbiont taxon (or Unidentified symbiont), followed by the count and Symbiont ID when set. The subtitle shows linked fish individuals, the interaction type, the category (for parasitic and parasitoid interactions), the anatomical location, the life stage, and the preparation method.

Select a row's edit button to change it. To delete records, turn on selection, check the records, and confirm the delete. Deleting the host specimen deletes its symbionts too.

Tissue curation can check symbiont tubes into storage boxes alongside tissues. Turn on Include symbionts in its setup to match symbionts by symbiont ID or by the field ID of their host, and use Symbiont category to limit the match. Box cells label symbionts with a leading P that sets them apart from parts.

WhereWhat you get
Export RecordsRecord type Symbionts: one row per symbiont, followed by its host's collecting record. Specimen exports for catalogs with symbionts also add the examination fields and symbiont columns.
Data tableThe Symbionts table shows symbiont ID, taxon, interaction type, category, count, and anatomical location, and can be edited in bulk.
Document templatesRecord type Symbiont, for vial labels and slide labels.
StatisticsMeasure Symbionts, grouped by symbiont taxon, category, anatomical location, or host species. Offered once the project has a symbiont record.
Data packagesThe symbiont, symbiontDetection, and symbiontIndividual tables, plus vocabularies/symbionts.csv with your symbiont settings.

Project merges and imports match symbionts by UUID. A symbiont UUID that is already in the database is flagged for review instead of being imported twice.

In a Darwin Core archive, each symbiont becomes its own occurrence, linked to its host by an OrganismInteraction row:

NAHPU fieldDarwin Core
UUIDoccurrenceID and organismInteractionID
Symbiont IDcatalogNumber
Symbiont taxontaxonID, scientificName, and the higher ranks
CollectorrecordedBy, recordedByID
Determiner, Date determined, Determination methodidentifiedBy, identifiedByID, dateIdentified, identificationType
Count, Life stageindividualCount, lifeStage
Preparation method, Treatmentpreparations
Date collected, Time collectedeventDate, eventTime
Detection methodsamplingProtocol
RemarksoccurrenceRemarks
Interaction typeorganismInteractionType; a record without one falls back to its category
Category, Association statusorganismInteractionDescription, when an interaction type is set
Anatomical locationrelatedOrganismPart
IndividualsA host individual occurrence assertion

The symbiont occurrence shares the host's eventID, uses basisOfRecord PreservedSpecimen, and names its host in associatedOccurrences. Storage, museum, and preservation-date fields have no Darwin Core term and stay in the NAHPU data package. See the Darwin Core audit for every column.

NAHPU recorded only parasites before it tracked symbionts. Updating moves those records into symbionts automatically: every existing record gets the interaction type Parasitic, and its people become a collector and a determiner. Old category values such as Ectoparasite keep working. Exports, templates, presets, and configs that still use parasite names are read with their symbiont names.