Ir al contenido

Basic tutorial 4: Record trap lines as collecting events

Esta página aún no está disponible en tu idioma.

A site says where. A collecting event says when, how, and by whom: the dates a line ran, the traps on it, the people who worked it, and the weather. Specimens link to an event, not straight to a site, so the event is the bridge that gives each specimen its place, method, and collector.

On paper, this information is scattered. Trap counts are in the journal, the method is rewritten on every specimen form, and the people who checked the traps are not recorded at all.

Each line ran once, so each site gets one event. The dates and trap counts come from the journal; nothing here is on the specimen forms.

SiteStartEndMethodCountEvent notes
TJHH-L112 Sep 201416 Sep 2014Snap trap31One broken trap removed on 14 Sep. Rebaiting stopped on 15 Sep; some traps left baited.
TJHH-P112 Sep 201416 Sep 2014Pitfall10About 50 m from camp, next to the Line 1 snap traps.
TJBS-L212 Sep 201418 Sep 2014Snap trap25Most traps 1–2 m above the ground.
TJHH-L316 Sep 201418 Sep 2014Snap trap20Checked by boat.
TJHH-P416 Sep 201418 Sep 2014PitfallLeave emptyNumber of pitfalls not recorded. Checked by boat.
TJHH-L516 Sep 201418 Sep 2014Snap trap20Many traps set on lianas. Checked by boat.
  1. Open Events and select +.

  2. Choose the Site ID TJHH-L1.

  3. Set Start Date to 12 September 2014 and End Date to 16 September 2014. NAHPU builds the Event ID from the Site ID and start date.

  4. Leave Start Time and End Time empty. The journal does not say when the line was set or pulled, and an empty field is better than a guess.

  5. Set Primary activity to Collecting.

  6. In Notes, enter the event notes from the table, then add the team's standard practice for capture times: Capture time 07:00 is the team's standard practice for overnight captures; the exact capture time is unknown.

    Snap traps and pitfalls were checked in the morning, and no one could tell when during the night an animal was caught. Recording 07:00 for every overnight capture was the team's standard practice. On paper that rule lived only in the team's heads; written into the event, it travels with every specimen linked to it, so no one mistakes 07:00 for a measured time.

  1. Select Add collection method.
  2. Choose Snap trap and set Count to 31.
  3. Leave Brand and Model and Size empty; the paper does not give them.

This is where the paper's Line 1 problem goes away. TJHH-L1 has only snap traps and TJHH-P1 has only pitfalls. A specimen linked to TJHH-P1 can only have come from a pitfall, whatever its form says.

On paper, Collector reads Heru Handika on every form. But on 17 September, Heru stayed in camp to prepare specimens while Bima, Citra, Dian, Eko, and Fajar took the boat to check the Pasir Putih lines. The event records who was there.

  1. In Settings > Events, add the personnel roles Local guide and Boat operator. Leader and Helper are already in the list.

  2. Back in the event, open the personnel tab (people icon) and select Add personnel.

  3. Add the people for this event:

    EventPeople and roles
    TJHH-L1, TJHH-P1Heru Handika, Leader; Bima Sampel and Citra Contoh, Helper; Eko Pemandu, Local guide
    TJBS-L2Bima Sampel, Leader; Citra Contoh and Heru Handika, Helper
    TJHH-L3, TJHH-P4, TJHH-L5Heru Handika, Leader; Bima Sampel, Citra Contoh, and Dian Teladan, Helper; Eko Pemandu, Local guide; Fajar Nelayan, Boat operator

In Basic tutorial 5, each specimen's capture Collector is chosen from its event's people, so it can only name someone who was there.

The finished event for Line 1. NAHPU built the Event ID TJHH-L1-2014-09-12 from the Site ID and start date, and the times stay empty:

NAHPU Events page on an iPad for TJHH-L1-2014-09-12, with dates 12 to 16 September 2014, notes that include the 07:00 standard practice, 31 snap traps, and the event personnel

The journal for 13 September gives the only weather for the trip: night temperatures from about 16 °C down to 14 °C, no rain, and a sky that was sometimes cloudy and sometimes very clear.

  1. In the TJHH-L1 event, open the environmental data tab (cloud icon).
  2. Enter what the journal supports: the temperature range, no rain, and variable cloud cover. Put the date in the notes: Night of 12–13 September.
  3. Leave the other fields empty.
  1. With TJHH-L1 open, choose Duplicate event from the three-dot menu. NAHPU copies the site, activity, notes, methods, and people, moves the dates forward one day, and gives the copy an empty environmental-data record.
  2. Change the Site ID to TJHH-P1 and set the dates back to 12–16 September.
  3. Replace the collection method with Pitfall, count 10, and update the notes.
  4. Create the remaining four events the same way, using the table in step 1 and the people in step 4.
  • Trap counts, dates, and setup details that were only in the journal are now attached to the line they describe.
  • Each event has exactly one method, so pitfall and snap-trap captures cannot be confused.
  • The guide, the boatman, and the teammates who checked traps are credited.
  • Gaps, such as the unrecorded number of pitfalls on Line 4, are visible as empty fields.

Basic tutorial 5: Enter specimen records